Nvidia mit TV und VGA benutzen
Mic kämpfte einige Zeit an folgender gewünschter Konfiguration
- 1x ein HDTV TV an DVI mit 1280*720 und
- 1x ein TFT an VGA mit 1280*1024
Anfangs war nur HDTV an DVI in 1280*720 möglich, der TFT blieb dunkel.
Es half kein Twinview oder Xinerama.
Dann aber die Lösung: "Es war ne Kleinigkeit." (O-Ton) ;-)
Die DPMS Option musste weg.
Hier der Abschnitt in der XF86Config-4, wie es jetzt funktioniert.
# ************************************************** ********************
# Monitor section
# ************************************************** ********************
Section "Monitor"
Identifier "HDTV"
HorizSync 30-46
VertRefresh 48-65
ModeLine "720p" 74.160 1280 1352 1392 1648 720 725 730 750 -hsync -vsync
# Option "DPMS"
EndSection
Section "Monitor"
Identifier "NEC1800"
HorizSync 24-82.5 # multisync
VertRefresh 30-105 # ixed-sync monitor
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
Modeline "1280x1024" 109.62 1280 1336 1472 1720 1024 1024 1026 1062
# Option "DPMS"
EndSection
# ************************************************** ********************
# Graphics device section
# ************************************************** ********************
Section "Device"
Identifier "Nvidia 0"
Driver "nvidia"
VendorName "NVIDIA"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Nvidia 1"
Driver "nvidia"
Option "ConnectedMonitor" "DFP"
Option "FlatPanelProperties" "aspect-scaled"
Option "RenderAccel" "true"
BusID "PCI:1:0:0"
Screen 1
EndSection
# ************************************************** ********************
# Screen sections.
# ************************************************** ********************
Section "Screen"
Identifier "Screen 0"
Device "Nvidia 0"
Monitor "NEC1800"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Nvidia 1"
Monitor "HDTV"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "720p"
EndSubSection
EndSection
# ************************************************** ********************
# ServerLayout sections.
# ************************************************** ********************
Section "ServerLayout"
Identifier "Multi Head"
Screen 0 "Screen 0" 0 0
Screen 1 "Screen 1" LeftOf "Screen 0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Programme auf dem HDTV startet er jetzt so:
#!/bin/sh
# script opens file in fullscreen mode on DLP
DISPLAY=:0.1
xine -f "$@"
Thx to mic -->
http://forum.kanotix.net/viewtopic.php?t=6385∞
zurück